The XL Hydraulic Detachable Extendable features two market leading, innovative XL features engineered for extremely efficient set-up; the patented XL Extend-A-Trac and the XL Cheater neck. This combination takes the hassle out of preparing the trailer for travel.
-
The patented XL Extend-A-Trac allows for extending and retracting the trailer without hooking and unhooking air and electrical lines
-
XL's extendable design uses 6” greasable rollers incorporate an oil impregnated bronze to make extending easy
-
Optional extension locks at 24” on center or other specific open well lengths add versatilty
-
The patented XL Cheater Neck allows you to slide the king pin hydraulically
-
The patented XL Cheater Neck hooks and unhooks without continually getting in and out of the truck
-
The patented XL Cheater Neck boasts oversized donuts and tapered load pins which allow for faster hookup on uneven ground
-
XL’s new premium paint process, featuring sandblasting, includes a full 1 year warranty
-
D.O.T. approved 12V sealed Grote harness with 7 year warranty
-
Always striving to surpass market standards, all new XL products feature a 5 year structural warranty
-
XL’s one piece construction results in stronger products. Trailer I-beams are made from one piece web and flange and then welded on all sides
| Model |
Trailer Capacity |
|
XL 80-HDE
|
80,000 lb overall closed, Concentrated: 60,000 lb in 10' closed
|
|
XL 90-HDE
|
90,000 lb overall closed, Concentrated: 70,000 lb in 10' closed
|
|
XL 100-HDE
|
100,000 lb overall closed, Concentrated: 80,000 lb in 10' closed
|
|
XL 110-HDE
|
110,000 lb overall closed, Concentrated: 90,000 lb in 10' closed
|
Back to List
XL 80-HDE
CAPACITY
- 80,000 lb overall CLOSED
- Concentrated: 60,000 lb in 10' CLOSED
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- 10' 5" long
- 49" 5TH WHEEL HEIGHT
- 84" SWING CLEARANCE
- 16" KING PIN SETTING
- 7 POSITION variable ride height
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK W/ MANUAL SAFETY LATCH
- prep for 36" flip neck
MAIN DECK
- 28' 7" - 49' 11" long
- patented xl extend-a-trac
- AIR OPERATED LOCK PIN With extension stops 24" on center
- 6" GREASABLE ROLLERS
- T-I FLANGE, 80K WEB
- 20" LOADED DECK HEIGHT
- 6" GROUND CLEARANCE
- FORMED CROSSMEMBERS ON 12" CENTERS
- (8) BENT D-RINGS PER SIDE
- 1 1/8" FLUSH APITONG DECKING
- ramp tapers to 4"
- (14) 1/2" Chain Drops Per side
- removable swing out outrigger brackets on 24" centers
REAR BRIDGE
- 9' LONG
- 40" DECK Height
- 1 1/8" FLUSH APITONG DECKING
- (2) FLAG HOLDERS
- (2) stake pockets in tail channel
- (2) pan style D-RINGS per side, on corner
- 66" wide bumper at rear
- Frame reinforcement for flip axle
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48'
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- raise and lower valve
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (2) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- 4S2M ABS
- 16 1/2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 TIRES
LIGHTING
- D.O.T. approved 12V SEALED HARNESS
- RUBBER Mounted led LIGHTS
- 2 TAIL LighT PacKaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Back to List
XL 90-HDE
CAPACITY
- 90,000 LB OVERALL CLOSED
- CONCENTRATED: 80,000 LB IN 10' CLOSED
GOOSENECK
- HYDRAULIC DETACHABLE NARROW NECK
- 10' 5" LONG
- 49" 5TH WHEEL HEIGHT
- 84" SWING CLEARANCE
- 16" KING PIN SETTING
- 7 POSITION VARIABLE RIDE HEIGHT
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK W/ MANUAL SAFETY LATCH
- PREP FOR 36" FLIP NECK
MAIN DECK
- 28' 7" - 49' 11" LONG
- PATENTED XL EXTEND-A-TRAC
- AIR OPERATED LOCK PIN WITH EXTENSION STOPS 24" ON CENTER
- 6" GREASABLE ROLLERS
- T-I FLANGE, 80K WEB
- 20" LOADED DECK HEIGHT
- 6" GROUND CLEARANCE
- FORMED CROSSMEMBERS ON 12" CENTERS
- (8) BENT D-RINGS PER SIDE
- 1 1/8" FLUSH APITONG DECKING
- RAMP TAPERS TO 4"
- (14) 1/2" CHAIN DROPS PER SIDE
- REMOVABLE SWING OUT OUTRIGGER BRACKETS ON 24" CENTERS
REAR BRIDGE
- 9' LONG
- 40" DECK HEIGHT
- 1 1/8" FLUSH APITONG DECKING
- (2) FLAG HOLDERS
- (2) STAKE POCKETS IN TAIL CHANNEL
- (2) PAN STYLE D-RINGS PER SIDE, ON CORNER
- 66" WIDE BUMPER AT REAR
- FRAME REINFORCEMENT FOR 2 axle booster
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48'
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 LB AIR RIDE
- RAISE AND LOWER VALVE
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (2) 25,000 LB NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- 4S2M ABS
- 16 1/2" X 7" BRAKES
WHEELS & TIRES
- 8.25 X 22.5 STEEL RIMS
- 255/ 70R/ 22.5 TIRES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER MOUNTED LED LIGHTS
- 2 TAIL LIGHT PACKAGE WITH ALUMINUM COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Back to List
XL 100-HDE
CAPACITY
- 100,000 lb overall CLOSED
- Concentrated: 80,000 lb in 10' CLOSED
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- APPROXIMATELY 35" TRAVEL
- 10' 5" NON GROUND BEARING
- 7 POSITION 5TH WHEEL HEIGHT
- 84" SWING CLEARANCE
- 16" KING PIN SETTING
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK W/ MANUAL SAFETY LATCH
MAIN DECK
- 24' 1" - 40' 5" LONG
- patented xl Extend-a-trac
- T-1 FLANGE, 80K WEB
- 24" LOADED DECK HEIGHT
- 6" GROUND CLEARANCE
- FAB I BEAM OUTSIDE RAILS
- DOUBLE BOX BEAM CONSTRUCTION
- (5) BENT D-RINGS PER SIDE
- 6" JR. I-BEAM cross members ON 12" ALT. CenTeRS
- 1 1/8" FLUSH APITONG DECKING
- AIR OPERATED LOCK PIN W/ 5 STOPS 2'-3'-5'-5'-5'
- 6" GREASABLE ROLLERS
REAR BRIDGE
- 13' 6" LONG
- COVERED WHEELS
- 40" DECK HeighT
- 1 1/8" FLUSH APITONG DECKING
- (2) FLAG HOLDERs
- (2) BENT D-RINGS IN TAIL CHANNEL
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48'
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (3) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- 4S2M ABS
- 16 1/2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 TIRES
LIGHTING
- D.O.T Approved 12V SEALED HARNESS
- RUBBER Mounted led LIGHTS
- (1) MID-TURN SIGNAL per SIDE
- (2) CLEARANCE LIGHTS per SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LighT PacKaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Back to List
XL 110-HDE
CAPACITY
- 110,000 lb overall CLOSED
- Concentrated: 90,000 lb in 10' CLOSED
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- APPROXIMATELY 35" TRAVEL up/down
- 10' 5" NON-GROUND BEARING
- 7 POSITION variable ride height
- 84" SWING CLEARANCE
- 16" KING PIN SETTING
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK W/ MANUAL SAFETY LATCH
MAIN DECK
- 102" wide
- 24' 1" - 40' 5" long
- patented XL Extend-a-trac
- T-I FLANGE, 80K WEB
- 24" LOADED DECK HEIGHT
- 6" GROUND CLEARANCE
- FAB I-BEAM OUTSIDE RAILS
- DOUBLE BOX BEAM CONSTRUCTION
- (5) BENT D-RINGS PER SIDE
- 6" JR. I-BEAM cross members ON 12" ALT. CenTeRS
- 1 1/8" FLUSH APITONG DECKING
- AIR OPERATED LOCK PIN W/ 5 STOPS 2'-3'-5'-5'-5'
- 6" GREASABLE ROLLERS
REAR BRIDGE
- 13' 6" LONG
- 102" WIDE
- COVERED WHEELS
- 40" Loaded DECK height
- 1 1/8" FLUSH APITONG DECKING
- (2) FLAG HOLDERS
- (2) BENT D-RINGS IN TAIL CHANNEL
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48'
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (3) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- 4S2M ABS
- 16 1/2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 TIRES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER mounted led LIGHTS
- (1) MID-TURN SIGNAL / SIDE
- (2) CLEARANCE LIGHTS / SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LighT PacKaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Below are some of the available options for this model. Contact us to find out how to further customize your trailer.
Photos may contain non-standard features.
Back to List
Decking Options
Aluminum Decking
Aluminum decking is a lighter weight option.
Photos may contain non-standard features.
Back to List
Back to List
Axle Options
Aluminum Durabright Wheels
Aluminum Durabright Wheels are a light weight option. These rims keep their shine throughout their lifetime. They never need to be polished.
Photos may contain non-standard features.
Back to List
Back to List
Ramp Options
Aluminum Portable Ramp
Add efficiency to your trailer with Aluminum Portable Ramps.
Photos may contain non-standard features.
Back to List
Back to List
Outrigger Options
Aluminum Pull Out Ramp
Aluminum Pull Out Ramps are used for loading equipment onto outriggers.
Photos may contain non-standard features.
Back to List
Back to List
Lighting Options
LED 2 Tail Light Package (Standard)
The 2 Tail Light Package is the standard on XL products. XL tail lights feature rubber mounted LED lights.
Photos may contain non-standard features.
Back to List
Back to List
Tie Down Options
Bent D-Rings (Standard)
XL offers a wide range of tie down options to fit your preference and needs. The Bent D-Rings are the standard.
Photos may contain non-standard features.
Back to List
Back to List
Sign Options
Oversize Load Sign
The Oversize Load Signs increases safety by alerting others of the trailers' load.
Photos may contain non-standard features.
Back to List
Back to List
Paint Options
Black Paint (Standard)
Black paint is one of XL's standard color options.
Photos may contain non-standard features.
Back to List
Back to List
Suspension Options
Air Weigh Scale
The Air Weigh Scale digitally reads the loaded weight on each axle, making accurate loading more efficient.
Photos may contain non-standard features.
Back to List