Are you facing the ongoing challenge presented by construction equipment getting bigger, heavier and more varied? The XL Hydraulic Detachable Gooseneck Lowboy Trailer is built distinctively to handle the heaviest construction equipment with ease.
-
Versatility through the many different axle configurations available
-
Main deck available in many, lengths, widths and heights
-
Hydraulic neck is wider and stronger than the industry standard offering increased stability for high center of gravity loads
-
Hydraulic support arm contacts truck frames rails only; there is no need to carry a 4 x 4 for blocking the neck
-
XL’s new premium paint process, featuring sandblasting, includes a full 1 year warranty
-
D.O.T. approved 12V sealed Grote harness with 7 year warranty
-
Always striving to surpass market standards, all new XL products feature a 5 year structural warranty
-
XL’s one piece construction results in stronger products. Trailer I-beams are made from one piece web and flange and then welded on all sides
| Model |
Trailer Capacity |
|
XL 70-HDG
|
70,000 lb overall, Concentrated: 70,000 lb in 10'
|
|
XL 80-HDG
|
80,000 lb overall, Concentrated: 80,000 lb in 10'
|
|
XL 100-HDG
|
100,000 lb overall, Concentrated: 100,000 lb in 10'
|
|
XL 110-HDG
|
110,000 lb overall, Concentrated: 110,000 lb in 10'
|
|
XL 120-HDG
|
120,000 lb overall, Concentrated: 120,000 lb in 10'
|
Back to List
XL 70-HDG
CAPACITY
- 70,000 lb overall
- 70,000 lb in 10'
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- 10' 5" long
- APPROXIMATELY 35" TRAVEL up/down
- 7 POSITION variable ride height
- 84" SWING CLEARANCE
- 16" KING PIN SETTING
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK With MANUAL SAFETY LATCH
MAIN DECK
- 24' long
- T-I FLANGE, 80K WEB
- 24" LOADED DECK HEIGHT
- 8" GROUND CLEARANCE
- (4) 16" fab i-BEAMS
- 8" & 4" stubbed JR. I-BEAM crossmembers on 12" ALT. Centers
- (5) BENT D-RINGS per side
- 1 3/8" RAISED APITONG DECKING
- center deck open
- SWING OUT OUTRIGGERS ON 24" CENTERS
- DOUBLE OUTRIGGERS at FRONT
REAR BRIDGE
- 9' 6" LONG
- 40" DECK HEIGHT
- open wheels, open boom
- (2) BENT D-RINGS IN TAIL CHANNEL
- (2) FLAG HOLDERS
- frame reinforcement for single axle booster
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 43' 11"
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- manual ride height control
AXLES
- (3) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- no abs, 2 spring brakes
- 16 1⁄2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 H RATED TIRES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER MounTed LED LIGHTS
- (1) MID-TURN SIGNAL per SIDE
- (2) CLEARANCE LIGHTS per SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LighT PacKaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Back to List
XL 80-HDG
CAPACITY
- 80,000 lb overall
- 80,000 lb in 10'
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- 10' 5" long
- APPROXIMATELY 35" TRAVEL up/down
- 7 POSITION variable ride height
- 84" SWING CLEARANCE
- 16" KING PIN SETTING
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK With MANUAL SAFETY LATCH
MAIN DECK
- 24' LONG
- T-I FLANGE, 80K WEB
- 24" LOADED DECK HEIGHT
- 8" GROUND CLEARANCE
- (4) 16" fab i-beams
- 10" & 4" stubbed JR. I-BEAM 12" ALT. CenTeRS
- (50) BENT D-RINGS per side
- 1 3/8" APITONG DECKING RAISED
- center deck open
- SWING OUT OUTRIGGERS ON 24" CENTERS
- DOUBLE OUTRIGGERS at FRONT
REAR BRIDGE
- 14' long
- 40" DECK HEIGHT
- open wheels, OPEN BOOM
- (2) BENT D-RINGS IN TAIL CHANNEL
- (2) flag holders
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48' 5"
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (3) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- No abs, 2 SPRING BRAKES
- 16 1/2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 H RATED TIRES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER MounTed LED LIGHTS
- (1) MID-TURN SIGNALper SIDE
- (2) CLEARANCE LIGHTS per SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LighT PackaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Back to List
XL 100-HDG
.jpg)
CAPACITY
- 100,000 lb overall
- 100,000 lb in 10'
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- 11'5" long
- APPROXIMATELY 35" TRAVEL up/down
- 7 POSITION variable ride height
- 96" SWING CLEARANCE
- 16" KING PIN SETTING
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK W/ MANUAL SAFETY LATCH
MAIN DECK
- 24' LONG
- T-I FLANGE, 80K WEB
- 24" LOADED DECK HEIGHT
- 8" GROUND CLEARANCE
- (4) 16" fab i-beams
- (5) BENT D-RINGS per side
- 10" & 4" stubbed JR. I-BEAM cross members on 12" ALT. CenTeRS
- 1 3/8" RAISED APITONG DECKING
- center deck open
- SWING OUT OUTRIGGERS ON 24" CENTERS
- DOUBLE OUTRIGGERS at FRONT
REAR BRIDGE
- 14' LONG
- 40" loaded DECK HEIGHT
- open wheels, open boom
- (2) FLAG HOLDERS
- (2) BENT D-RINGS IN TAIL CHANNEL
- frame reinforcement for single axle booster
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48' 5"
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (3) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- no abs, 2 spring brakes
- 16 1⁄2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 H RATED TIRES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER mounted led LIGHTS
- (1) MID-TURN SIGNAL per SIDE
- (2) CLEARANCE LIGHTS per SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LighT PacKaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Back to List
XL 110-HDG
CAPACITY
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- 12' 5" long
- APPROXIMATLEY 35" TRAVEL up/down
- 7 POSITION variable ride height
- 49" 5th wheel height
- 108" SWING CLEARANCE
- 16" KING PIN SETTING
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK With MANUAL SAFETY LATCH
MAIN DECK
- 24' LONG
- T-I FLANGE, 80K WEB
- 24" LOADED DECK HEIGHT
- 8" GROUND CLEARANCE
- (4) 16" Fab i- BEAMS
- 10" & 4" stubbed JR. I-BEAM 12" ALT. CenTeRS
- (5) BENT D-RINGS per side
- 1 3/8" RAISED APITONG DECKING
- center deck open
- SWING OUT OUTRIGGERS with 24" CENTERS
- DOUBLE OUTRIGGERS at FRONT
REAR BRIDGE
- 14' long
- 40" DECK HEIGHT
- open wheels, open boom
- 2 BENT D-RINGS IN TAIL CHANNEL
- (2) FLAG HOLDERS
- FRAME REINFORCEMENT FOR SINGLE AXLE BOOSTER
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 50' 5"
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (3) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- no abs, 2 spring brakes
- 16 1/2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 TIRES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER Mounted led LIGHTS
- (1) MID-TURN SIGNAL per SIDE
- (2) CLEARANCE LIGHTS per SIDE
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LighT PacKaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Back to List
XL 120-HDG
CAPACITY
GOOSENECK
- HYDraulic DETACHABLE NARROW NECK
- 12' 5" long
- APPROXIMATLEY 35" TRAVEL up/down
- 7 POSITION variable ride height
- 105" SWING CLEARANCE
- 16" KING PIN SETTING
- HYDRAULICS RUN OFF OF WET KIT
- AIR OPERATED LOCK W/ MANUAL SAFETY LATCH
MAIN DECK
- 24' long
- T-I FLANGE, 80K WEB
- 24" LOADED DECK HEIGHT
- 8" GROUND CLEARANCE
- (4) 16" fab i-BEAMS
- 10" & 4" subbed JR. I-BEAM 12" ALT. centers
- (5) BENT D-RINGS per side
- 1 3/8" RAISED APITONG DECKING
- center deck open
- SWING OUT OUTRIGGERS ON 24" CENTERS
- DOUBLE OUTRIGGERS at FRONT
REAR BRIDGE
- 14' long
- 40" DECK HEIGHT
- open wheels, open boom
- (2) BENT D-RINGS IN TAIL CHANNEL
- FRAME REINFORCEMENT FOR SINGLE AXLE BOOSTER
- (2) FLAG HOLDERS
|
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 50' 5"
- OVERALL WIDTH: 102"
SUSPENSION
- 25,000 lb AIR RIDE
- MANUAL RIDE HEIGHT CONTROL
AXLES
- (3) 25,000 lb NOMINAL
- 54" SPACING
- HUB PILOT, OUTBOARD DRUMS
- no abs, 2 spring brakes
- 16 1/2" x 7" BRAKES
WHEELS & TIRES
- 8.25 x 22.5 STEEL RIMS
- 255/ 70R/ 22.5 H RATED TIRES
LIGHTING
- D.O.T. APPROVED12V SEALED HARNESS
- RUBBER Mounted led LIGHTS
- (1) MID-TURN SIGNAL per side
- (2) CLEARANCE LIGHTS per side
- 7 POLE ELECTRICAL SOCKET
- 2 TAIL LighT PacKaGe With ALUMinum COVER
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Below are some of the available options for this model. Contact us to find out how to further customize your trailer.
Photos may contain non-standard features.
Back to List
Decking Options
Aluminum Decking
Aluminum decking is a lighter weight option.
Photos may contain non-standard features.
Back to List
Back to List
Axle Options
Aluminum Durabright Wheels
Aluminum Durabright Wheels are a light weight option. These rims keep their shine throughout their lifetime. They never need to be polished.
Photos may contain non-standard features.
Back to List
Back to List
Ramp Options
Aluminum Portable Ramp
Add efficiency to your trailer with Aluminum Portable Ramps.
Photos may contain non-standard features.
Back to List
Back to List
Outrigger Options
Aluminum Pull Out Ramp
Aluminum Pull Out Ramps are used for loading equipment onto outriggers.
Photos may contain non-standard features.
Back to List
Back to List
Lighting Options
LED 2 Tail Light Package (Standard)
The 2 Tail Light Package is the standard on XL products. XL tail lights feature rubber mounted LED lights.
Photos may contain non-standard features.
Back to List
Back to List
Tie Down Options
Bent D-Rings (Standard)
XL offers a wide range of tie down options to fit your preference and needs. The Bent D-Rings are the standard.
Photos may contain non-standard features.
Back to List
Back to List
Sign Options
Oversize Load Sign
The Oversize Load Signs increases safety by alerting others of the trailers' load.
Photos may contain non-standard features.
Back to List
Back to List
Paint Options
Black Paint (Standard)
Black paint is one of XL's standard color options.
Photos may contain non-standard features.
Back to List
Back to List
Suspension Options
Air Weigh Scale
The Air Weigh Scale digitally reads the loaded weight on each axle, making accurate loading more efficient.
Photos may contain non-standard features.
Back to List