With a load angle of 10 degrees, the hydraulic tail is equipped to easily handle hard- to-load equipment such as man lifts, rollers, forklifts and paving equipment. The tail features a lifting capacity of 25,000 pounds for loads centered on the main platform.
-
Planetary drive 18,000 lb hydraulic winch with 75’ of 1/2” cable and an air kick out
-
A 9’ pop-up ramp from deck to neck allows for easy loading onto the neck.
-
Work light at rear of the gooseneck for loading and unloading in the dark.
-
A foot hole and grab handle on each side of the gooseneck assist in climbing onto the deck.
-
A 2 function wireless remote comes standard, other remote options are available
-
Tail hinge points stay clean thanks to lug style hinges. These hinges prevent debris from accumulating.
-
The tail is comprised of two sections – an 8-foot 8-inch platform ramp and a 60-inch flip tail.
Model |
Trailer Capacity |
XL 80 Power Tail
|
80,000 lb overall, Concentrated: 50,000 lb in 10'
|
Back to List
XL 80 Power Tail

CAPACITY & Weight
- 80,000 LB OVERALL
- CONCENTRATED: 50,000 LB IN 10'
OVERALL LENGTH & WIDTH
- OVERALL LENGTH: 48' or 53'
- OVERALL WIDTH: 102"
GOOSENECK
- 9' Long full-width
- 90° slope
- 16" king pin setting
- 86" swing clearance
- 49" 5TH WHEEL HEIGHT
- steel tread plate decking
- (2) D-Rings per side
- 2 speed landing gear with handle on driver side
- wet line hydraulics to run off truck
- hydraulic levers on driver side
- Planetary Drive 18,000 LB Hydraulic Winch with 75' of 1/2" cable & air kick out
- 2 function wireless remote for winch
- 2 toolboxes with lids
- 9' long pop-up ramp, deck to neck
- Integrated foot step and grab handle, on both sides
MAIN DECK
- T-I FLANGE, 80K WEB
- 48' oal: 30' 4" long
- 53' oal: 35' 4" long
- 36" loaded deck height
- 1 3/8" raised aditong
- 1/4" tread plate covered wheels
- 10" & 8" jr. I-beam cross members on alternating 12" centers
- 18" fabricated I-beam side members
- (5) d-rings per side
- stake pockets and chain slots on alternating 24" centers, sides
- chain slots down center of deck on 48" centers
Tail Section
- 13' 8" hydraulic tail: 8' 8" platform 60" fold under flip tail
- Automatic flip tail lock
- traction aids
- star traction plate
|
SUSPENSION
AXLES
- (2) 25,000 LB NOMINAL
- 49" Axle SPACING
- HUB PILOT, OUTBOARD DRUMS
- 4s2m abs
- spring brakes on 2 axles
- 12 1/4" x 7 1/2" brakes
- auto slack adjusters
- air dump on both axles
WHEELS & TIRES
- 6.75 x 17.5 STEEL RIMS
- 245/ 70R/ 17.5 TIRES
LIGHTING
- D.O.T. APPROVED 12V SEALED HARNESS
- RUBBER MOUNTED LED LIGHTS
- 3 tail light package
- (1) MID-TURN SIGNAL PER SIDE
- (2) CLEARANCE LIGHTS PER SIDE
- 7 POLE ELECTRICAL SOCKET
PAINT
- 1 YEAR WARRANTY
- BLACK, IH RED, OR NEW CAT YELLOW
- AIR & ELECTRIC DONE AFTER PAINT
- MANY CUSTOM OPTIONS AVAILABLE
|
Back to List
Below are some of the available options for this model. Contact us to find out how to further customize your trailer.
Photos may contain non-standard features.
Back to List
Suspension Options

Air Weigh Digital Scale
<p>The Air Weigh Scale digitally reads the loaded weight on each axle, making accurate loading more efficient.</p>
Photos may contain non-standard features.
Back to List
Back to List
Axle Options

Aluminum Durabright Wheels
Aluminum Durabright Wheels are a light weight option. These rims keep their shine throughout their lifetime. They never need to be polished.
Photos may contain non-standard features.
Back to List
Back to List
Lighting Options

Amber Strobe Light with Switch
Amber Strove Lights make your trailer visable at night, adding safety when hauling.
Photos may contain non-standard features.
Back to List
Back to List
Paint Options

Black Paint (Standard)
Black paint is one of XL's standard color options.
Photos may contain non-standard features.
Back to List
Back to List
Gooseneck Options

Registration Holder
Store your documents in a convenient place, with a registration holder on the gooseneck.
Photos may contain non-standard features.
Back to List